UKM AUTOMOTIVE GROUP

List of international journal 2011

1. E. Ismail, A. K. Ariffin, S. Abdullah and M. J. Ghazali, 2011, Off-set crack propagation analysis under mixed mode loadings, International Journal of Automotive Technology, 12(2):225-232

2. A.A. Lashlem, Dzuraidah Abd Wahab, Shahrum Abdullah and Che Hassan Che Haron, 2011. Design Assessment for Reusability of an Automotive Safety Beam, Australian Journal of Basic and Applied Sciences, 5(11):167-175

3. A.E. Ismail, A.K. Ariffin, S. Abdullah, M.J. Ghazali, R. Daud, 2011. J-Integral Analysis of Surface Cracks in Round Bars under Bending Moment, Applied Mechanics and Materials, 52-54:43-48

4. Ahmad Rasdan Ismail, Norfadzilah Jusoh, Mohd. Nizam Ab. Rahman, Rozli Zulkifli and Kumaran Kardigama, 2011. Thermal Comfort Assessment at Parcel and Logistic Industry: A Field Study in Malaysia, The Journal of Institution of Engineers Malaysia (IEM), Vol. 72(3), pp.36-40. 72(3):36-40

5. Ali, M.B., Abdullah, S., Nuawi, M.Z., Ariffin, A.K., Mohammad, M. 2011. Evaluating charpy impact signals using power spectrum densities: A finite element method approach, International Journal of Mechanical and Materials Engineering, 6(1):92-101

6. Baba Md Deros, Nor Kamaliana Khamis, Ahmad Rasdan Ismail, Haris Jamaluddin, Azmi Mat Adam and Sarudin Rosli, 2011. An Ergonomics Study on Assembly Line Workstation Design, American Journal of Applied Sciences, 8(11):1195-1201

7. D. D. I. Daruis, B. M. Deros and M. J. M. Nor, 2011. Malaysian Sitting Anthropometry for Seat Fit Parameters, Human Factors and Ergonomics in Manufacturing & Service Industries, 21(5):443455

8. Deros B.M., Mohamad D., Idris M.H.M., Rahman M.N.A., Ghani J.A., Ismail A.R, 2011. Setup Time Reduction in an Automotive Battery Assembly Line, International Journal of Systems Applications, Engineering & Development, 5(5): 618-625

9. Dian Darina Indah Daruis, Baba Md Deros, Mohd Jailani Mohd Nor, Mohammad Hosseini, 2011. An Integrated Model of Static and Dynamic Measurement for Seat Discomfort, Industrial Engineering & Management System, 10(3):185-190

10. E. A. Azrulhisham, Y. M. Asri, A.W. Dzuraidah, N.M. Nik Abdullah, A. Shahrum,and C. H. CheHassan, 2011. Evaluation of Fatigue Life Reliability of Steering Knuckle Using Pearson Parametric DistributionModel, Volume 2010,

11. Hindawi Publishing Corporation, International Journal of Quality, Statistics, and Reliability, Article ID 816407, 8 pages, doi:10.1155/2010/816407

12. E. Azrulhisham, Y.M. Asri, A.W. Dzuraidah, N.M. Nik Abdullah, C.H. Che Hassan and A. Shahrom, 2011. Application of Road Simulator Service Loads in Automotive Component Durability Assessment, The Open Industrial and Manufacturing Engineering Journal, 4:1-7

13. F. Iberahim, D.A. Wahab, Z.M. Nopiah & S. Abdullah, 2011. Establishment of remanufacturing index for locally manufactured automotive components, Key Engineering Materials, 486:77-80

14. Halina Misran, Ramesh Singh, Mariyam Jameelah Ghazali, 2011. Palm Oil Based Fatty Alcohols Templated Mesoporous Silica And Silica Spheres, International Journal of Nanoscience

15. Hosseini Fouladi, M., Ayub, M., Jailani Mohd Nor, M. 2011. Analysis of coir fiber acoustical characteristics , Applied Acoustics, 17(1):35-42

16. Ismail A.E., Ariffin A.K., Abdullah S., Ghazali M.J. 2011. Probabilistic high cycle multiaxial fatigue analysis using finite element, Transactions Hong Kong Institution of Engineers, 18(2):13-18

17. Kadhim N.A., Abdullah S., Ariffin A.K.2011. Effect of the fatigue data editing technique associated with finite element analysis on the component fatigue design period, Materials and Design, 32(2):1020-1030

18. M. Hilal Muftah and S. Mohamed Haris, 2011. A strain gauge based system for measuring dynamic loading on a rotating shaft, International Journal of Mechanics, 5(1):19-26

19. M. J. Ghazali, S. E. Mat Kamal, S. Abdullah and H. Misran, 2011. Characterizations of CU-based coated AL7075 via plasma-spray method - a wear case study, International Journal of Nanoscience, 10(6):1269-1274

20. M.A. Mussa, S. Abdullah, C.S. Nor Azwadi, N. Muhamad, 2011. Simulation of natural convection heat transfer in an enclosure by the lattice-Boltzmann method, Computers & Fluids, 44(1):162-168

21. M.H. Nahi, A. Ismail & A.K. Ariffin, 2011. Analysis of Asphalt Pavement under Nonuniform Tire-pavement Contact Stress using Finite Element Method, Journal of Applied Sciences, 11(14): 2562-2569

22. M.H.M. Haniff, A.R. Ismail, B.M. Deros, M.N.A. Rahman and K. Kardigama, 2011. The Taguchi Approach in Optimizing Environmental Factors Affecting Productivity in the Automotive Industry, International Journal of Electrochemical Science, 3:306-317

23. M.Z. Nuawi, A.R. Ismail, N.F. Kamaruddin, 2011. Comparative Study Of Whole-Body Vibration Exposure Etween Train And Car Passengers: A Case Study In Malaysia, International Journal of Automotive and Mechanical Engineering (IJAME), 4:490-503

24. Md Isa Ali, Shahrir Abdullah, Taib Iskandar Mohamad, 2011. Performance of Untreated Waste Cooking Oil Blends in a Diesel Engine, International Journal on Advanced Science, Engineering & Information Technology

25. Mohamad Ariff Shah Mohamed Nazmi, Dzuraidah Abd Wahab, Shahrum Abdullah and Razali Mohd Tihth, 2011. Development of Artificial Neural Network for Optimisation of Reusability in Automotive Components, Journal of Applied Sciences, 11(6):996-1003

26. Mohammad Hosseini Fouladi, Mohd. Jailani Mohd. Nor, Othman Inyatullah, Ahmad Kamal, 2011. Evaluation of seat vibration sources in driving condition using spectral analysis, Journal of Engineering Science and Technology, 6(3):342-358

27. Muhammd Nubli Zulkifli, Azman Jalar, Shahrum Abdullah, Roslinda Shamsudin, Rozli Zulkifli, 2011. Hardness Variation of Ball Bond Wire Bonding, Advanced Materials Research, Vols. 399 – 401, pp. 1048-1051

28. Mussa, M.A., Abdullah, S. , Nor Azwadi, C.S. and Zulkifli, R, 2011. Lattice Boltzmann Simulation of Cavity Flows at Various Reynolds Numbers, International Review on Modelling and Simulations, Vol 4(4), , pp. 1909-1919

29. Nor Rabbi`atul Adawiyah Norzali, Khairiah Haji Badri & Mohd Zaki Nuawi, 2011. Loading Effect of Aluminium Hydroxide onto the Mechanical, Thermal Conductivity, Acoustical and Burning properties of the Palm-Based Polyrethane Composites, Sains Malaysiana

30. Noraiham Mohamad, Andanastuti Muchatr, Mariyam Jameelah Ghazali, Dahlan Mohd And Che Husna Azhari, 2011. Investigation on Impact Fracture of Epoxidized Natural Rubber-Alumina Nanoparticles Composites (ENRAN), Global Engineers and Technologies Review, 1(2):26-34

31. Norani Nordin, Baba Md Deros, Dzuraidah Abdul Wahab, 2011. Lean Manufacturing Implementation in Malaysian Automotive Industry: An Exploratory Study, Operations and Supply Chain Management, 4(1):21-30

32. P. Thamburaja and N. Nik Abdullah, 2011. The transition from homogeneous flow to fracture in metallic glasses at high-homologous temperatures, Scripta Materialia, 65(9):751-754

33. R. Zulkifli and C.H. Azhari, 2011. Effect of silane concentrations on Mode I interlaminar fracture of woven silk/epoxy composites, Advanced Materials Research, 150-151, pp. 1171-1175

34. Rabbi`Atul, N., Norzali, A., Badri, K.H., Nuawi, M.Z, 2011. Effect of aluminum hydroxide loading on the compression stress and modulus, thermal conductivity and acoustic properties of palm-based polyurethane hybrid composite

35. Sains Malaysiana, 40(4):379-384

36. Rozli Zulkifli, Zulkarnain, Mohd Jailani Mohd Nor, Shahrum Abdullah, 2011. Perforated Plate Backing With Coconut Fiber as Sound Absorber For Low and Mid Range Frequencies, Key Engineering Materials Vols. 462-463 (2011) pp. 1284

37. S. Abdullah, T. E. Putra, M. Z. Nuawi and Z. M. Nopiah, 2011, The Use of Morlet Wavelet Coefficients for Identifying Fatigue Damage Features, Pertanika Journal of Science & Technology

38. S. Abdullah, W.H. Kurniawan, M. Khamas And Y. Ali, 2011. Emission Analysis of a Compressed Natural Gas Direct-Injection Engine with a Homogenous Mixture, International Journal of Automotive Technology, 12(1): 29-38

39. T. E. Putra, S. Abdullah, M. Z. Nuawi, 2011. Data Scattering of Fatigue Damaging Segmentation in order to Develop the Fatigue Damaging and Morlet Wavelet Coefficient Relationship, International Review of Mechanical Engineering, Vol. 5 n. 4, pp. 605-610

40. Y.M. Asri, E.A. Azrulhisham, A.W. Dzuraidah, A. Shahrir, A. Shahrum and Z. Azami, 2011. Fatigue Life Reliability Prediction of a Stub Axle using Monte Carlo Simulation, International Journal of Automotive Technology, 12(5):713-719

41. Yusoff Ali, Taib Iskandar Mohamad and Azhari Shamsudeen, 2011. The Impact on Quality of Students Through Participation in International Challenge Project -A Case Study on UKM’s Students, IEEE CFP1068H-CDR

42. Z. Karim, M.Z. Nuawi, J.A. Ghani, S. Abdullah and M.J. Ghazali, 2011. Optimization of Integrated Kurtosis-Based Algorithm for Z-Filter (I-Kaz ) TM Coefficient Using Multi Level Signal Decomposition Technique, World Applied Sciences Journal, 14 (10): 1541-1548

43. Zulkarnain, Rozli Zulkifli dan Mohd Jailani Mohd Nor, 2011. Effect of Porous Layer Backing and Perforation Ratio of Perforated Plate on Acoustic Characteristics of Coconut Fiber as a Sound Absorbent, Sains Malaysiana, Vol 40(6), pp. 623-629.