PROF. MADYA DR. MOHD. ZAIDI OMAR

 

PENYELIDIK BERSEKUTU

PROF. MADYA DR. MOHD. ZAIDI OMAR
Tel : 603-8921 6116
Fax : 603-8921 3452
E-mail : Alamat email ini dilindungi dari Spambot. Perlukan JavaScript untuk melihatnya
Tarikh lahir : 3 September 1971

CURRICULUM VITAE

Kelayakkan:

  • Ph. D
University Of Sheffield, United Kingdom
  • Sarjana
Loughborough University, United Kingdom
  • Sarjana Muda
University Of London, United Kingdom



Pengkhususan Penyelidikan :

  • Semi-solid Metal Processing (Thixoforming); Metallurgy; Metal Matrix Composites; Engineering Education.

 

Anugerah Penyelidikan :

  • Scholarships by Public Service Department of Malaysia to read A-Level, Centre for Preparatory Education, Mara Institute of Technology, Shah Alam, Selangor, Malaysia. (1990-1991).
  • Scholarship/Transferable-Loanship by Public Service Department of Malaysia  to do Bachelor of Mechanical Engineering at Imperial College of Science, Technology and Medicine, University of London, United Kingdom. (1992-1995).
  • Scholarship from National University of Malaysia to do Masters of Science (MSc) at Institute of Polymer Technology and Materials Engineering (IPTME), Loughborough University, United Kingdom. (1996-1997).
  • Awarded the CABOT CARBON PRIZE by Loughborough University, United Kingdom, for the BEST masters’ dissertation/thesis for Masters of Science (MSc) programme in Materials Engineering, Loughborough University.  (1997).
  • Scholarship from National University of Malaysia to read Doctor of Philosophy (PhD) at Department of Engineering Materials, The University of Sheffield, United Kingdom. (2001-2005).
  • Pass the doctorate degree without correction to the thesis (Mei 2005).  The thesis was awarded the DANIEL DONCASTER PRIZE by The University of Sheffield, United Kingdom, in recognition of the high quality of the thesis. (October 2005).



Projek Semasa :

  • Kajian Persepsi Industri Terhadap Kesesuaian dan Kebolehpasaran Graduan Kejuruteraan Malaysia
  • Development Of Semi-Solid Metal Processing For Automotive Components
  • Fatigue Reliability Of Magnesium Alloy Metal Matrix Composites For Lightweight Structural Components
  • Development Of A Fatigue Life Characterisation Of Composite Materials Under Spectrum Loadings
  • Fabrication And Materials Performance Of Carbon And Natural Silk Laminate Composites For Light Weight Vehicles (Lwv)
  • Development Of New Binder System For Metal Injection Molding Process Using A Locally Extracted Material
  • Modifications And New Developments Of Carbide Cutting Tool Geometry For Machining Cast Iron
  • Development Of Novel Dual-Phase Steel For Automotive Body Via Substitutional Solid-Solution Mechanism
  • Rawatan haba dan pemetaan mikrostruktur bagi keluli berprestasi tinggi untuk komponen otomotif. (Heat Treatments and microstructural mapping of high performance steel for automotive components)
  • A study of fatigue failure of automotive components using discrete data analysis

 

Penerbitan  :

  • Mohd Zaidi Omar, Kamarulzaman Mat, Noorhisham Tan Kofli, Siti Aminah Osman, Mohd Nizam Ab. Rahman dan Zuhairuse Md. Darus, Buku Log Latihan Industri Fakulti Kejuruteraan, Universiti Kebangsaan Malaysia, 2008.
  • Mohd Zaidi Omar, Kamarulzaman Mat, Noorhisham Tan Kofli, Siti Aminah Osman, Mohd Nizam Ab. Rahman dan Zuhairuse Md. Darus, Buku Log Latihan Industri Jabatan Seni Bina, Fakulti Kejuruteraan, Universiti Kebangsaan Malaysia, 2008.
  • Metalurgi (Metallurgy). Shahrum Abdullah Dan Mohd Zaidi Omar. Ensiklopedia Sains Dan Teknologi.  Jilid 2 Kejuruteraan Mekanikal, Keluaran UTM Dan DBP, Tahun 2000, M.S. 310-312. – In Malay Language.
  • M.Z. Omar, H.V. Atkinson, A.A. Howe, E.J. Palmiere, P. Kapranos and M.J. Ghazali, Solid-liquid structural break-up in M2 tool steel for semi-solid metal processing, accepted for publication Journal of Materials Science, Springer, US.
  • M.Z. Omar, A.Alfian, J. Syarif, S. Abdullah, M.J. Ghazali and Z. Sajuri, Modelling Phase Transformation and Phase Diagrams of Steels, Indonesian Nanoletter, Vol. 2, No. 3, 2008, 41-48
  • M.Z. Omar, H.V. Atkinson and P. Kapranos, Semi-Solid Metal Processing – A Processing Method Under Low Flow Loads, Jurnal Kejuruteraan, Jilid 19, Fakulti Kejuruteraan, UKM. 2007
  • M. Z. Omar, M.Z. Nuawi and S. Abdullah. 2000.  Design Methodology Development Of Tailor-Made Aortic Stent, Journal Institution of Engineers Malaysia. 61 (1): 23-31.
  • Mohd Zaidi Omar, Yusoff Ali, Rozli Zulkifli, Ahmad Rasdan Ismail, Mohd Nizam Ab Rahman dan. (eds.). 2005, The 5th Proceedings of Research and Development 2005 (in Malay), Department of Mechanical and Materials Engineering, UKM.  ISBN 983-2975-55-7.
  • Ahmad Kamal Ariffin Mohd Ihsan, Andanastuti Muchtar, Mohd Zaidi Omar, Shahrum Abdullah dan Azli Arifin (eds.). 2001. Proceedings of Research and Development 2001 (in Malay), Department of Mechanical and Materials Engineering, UKM. ISBN: 983-2446-19-8.



Institut Kajian Rantau Asia Barat, Universiti Kebangsaan Malaysia,
43600 Bangi, Selangor, Malaysia.
Tel: (603)-89213609 / (603)-89213452 Fax: (603) 8925-3452
E-mail: Alamat email ini dilindungi dari Spambot. Perlukan JavaScript untuk melihatnya






 

 


 

Versi Mobile | Ikuti Kami