Sains Ma1aysiana 25(3): 55-60 (1996)                                                                           Sains Fizis dan Gunaan/

                                                                                                                                     Physical and Applied Sciences

 

Sifat Pelet Karbon disediakan daripada

Serabut Tandan Kelapa Sawit

(Properties of carbon pellets prepared from fibres of

oil palm empty fruit bunches)

 

 

Mohamad Deraman

Jabatan Fizik

Universiti Kebangsaan Malaysia

43600 UKM Bangi Selangor Darul Ehsan

 

 

ABSTRAK

 

Kertas kerja ini membincangkan beberapa sifat sampel karbon pelet yang disediakan daripada serabut tandan kelapa sawit melalui proses karbonisasi sehingga suhu 1000°C. Didapati bahawa sampel mempunyai (i) rekahan­ mikro dan liang mikro (ii) spektrum belauan sinar-X yang jelas memperlihatkan struktur taktertib (iii) kira-kira 70 peratus kehilangan berat dan 20-30 peratus susutan isipadu (iv) ketumpatan 0.6gcm-3 dan 0.9gcm-3 bagi masing­masing kadar pemanasan cepat dan perlahan dan (v) kerintangan elektrik eksperimen dan ramalan masing-masing 7.75 ´ 10-2 Ω cm dan 8.57 ´  10-2 Ω cm. Alasan yang menyebabkan sifat-sifat ini berbeza daripada sifat-sifat karbon glasi komersial telah dikenalpasti dan usaha mengatasinya sedang dijalankan.

 

ABSTRACT

 

This paper presents some properties of the sample of carbon pellets prepared from fibres of oil palm empty fruit bunches by a carbonization process up to the temperature of 1000°C. It is found that the samples have (i) microcracks and micropores (ii) about 70 percent weight lost and 20­-30 percent volume shrinkage (iii) the densities of 0.6gcm-3 and 0.9gcm-3 for the fast and slow heating rate respectively (iv) the X-ray diffraction spectrum which clearly indicates the disordered structure and (v) the experimental and predicted electrical resistivities of 7.75 ´ 10-2 Ω cm and 8.57 ´ 10-2 Ω cm respectively. Reasons that make these properties differ from that of the glassy carbon commercial have been identical and effort to overcome this is being carried out.

 

RUJUKAN/REFERENCES

 

Bidin, R., Chong, C. N. & Wong, O. W. 1985. The Status of Fermentation Technology and Industry in Malaysia. Proc. First ASEAN Workshop on Fermentation Technology Applied to the Utilization, Kuala Lumpur, 22-24 Feb.

Choe, C. R., Lee, K. H. & Yoon, B. I. 1992. Carbon 31: 247-249 (1992).

Husin, M., Hassan, A. H. & Hassan, K. 1985. Manufacturing of Oil Palm Fibre Cement Roofing Tiles-A Preliminary Study. Proc. of the Nat. Symp. on Oil Palm by-Products, 5 Nov., Kuala Lumpur.

Husin, M., Hassan, A. H. & Kamishima, H. 1989. Production of Pulp and Paper from Oil Palm by-Product. Proc. 1989 PORIM International Development Conference, 5-9 Sept., Kuala Lumpur, Module II, Agriculture.

Lim, K. C. & Chang, K. W. 1989. Towards Optimizing Empty Fruit Bunch Application in Oil Palm. Proc. 1989 PORIM International Development Conference, 5-9 Sept., Kuala Lumpur, Module II, Agriculture.

Mohamad Deraman. 1993a. Application of Solid Carbon Products in Malaysia: Analysis of Imports. Bull. S&T Kead. Pej. Malaysia (Mal. Sol. State Sci. & Tech. Soc.). 3(3): 95-98.

Mohamad Deraman. 1992a. Pembuatan Karbon Glasi Daripada Serabut Kelapa Sawit. Bull. S&T Kead. Pej. Malaysia (Mal. Sol. State Sci. & Tech. Soc.) 2(1): 5-12.

Mohamad Deraman. 1992b. Pelet Disediakan Daripada Serabut Tandan Kelapa Sawit: Ciri Ketumpatan Pukal Pelet Lawan Tekanan Mampatan. Pros. Sem. Tahunan ke-IX Sains keadaan Pepejal, 2-3 November, Universiti Teknologi Malaysia.

 

 

previous