 |
 |
 |
 |
 |
 |
Sains Malaysiana 39(5)(2010): 725–730
Physical and Chemical Grain
Properties of New Registered Common Bean cv. ‘Kantar-05’
(Sifat
Fizikal dan Kimia Bijiran Kacang cv. Biasa Baru Berdaftar ’Kantar-05’)
Ismail Ozturk & Mazhar Kara
Department of Agricultural Machinery,
Faculty of Agriculture
Ataturk University, 25240 Erzurum,
Turkey
Sezai Ercisli*
Department of Horticulture, Faculty
of Agriculture
Ataturk University, 25240 Erzurum,
Turkey
Faik Kantar
Department of Field Crops, Faculty of
Agriculture
Ataturk University, 25240 Erzurum,
Turkey
Received: 3 September 2009 / Accepted:
24 March 2010
ABSTRACT
Moisture-dependent
physical grain properties of a new registered common bean cultivar ‘Kantar-05’
were determined. Some important chemical parameters of the grain were also
investigated. The average length, width and thickness of the grain were 12.48,
7.92 and 5.00 mm at 7.82% db (dry basis) moisture content. The values of bulk
density and true density of the grains decreased from 793.37 to 683.62 kg/m3 (P<0.01) and from 1269.37 to 1206.55 kg/m3 (P<0.05) with increasing moisture content. The coefficients
of dynamic friction increased from 0.180 to 0.316, 0.173 to 0.276, and 0.226 to
0.331 on steel, plywood and wood friction surface, respectively with increasing
moisture content. The force of rupture decreased from 121.88 to 68.93 N with
increase in moisture content. Phosphorus, potassium, calcium, sodium and
magnesium contents were 5020 ppm, 5576 ppm, 3562 ppm, 780 ppm and 372 ppm,
respectively wb% (wet basis) at the initial moisture content. The antioxidant
activity and phenolic content of the grains were found to be 56.62 % and 24.82
μg GAE/mg db., respectively at the
initial moisture content.
Keywords:
Common bean; chemical properties; physical properties
ABSTRAK
Sifat
fizikal bijiran yang bergantung kepada lembapan bagi kacang kultivar biasa yang
baru didaftar ‘Kantar-05’ telah ditentukan. Beberapa paramater kimia bijiran
yang penting juga dikaji. Purata panjang, lebar dan tebal bijiran tersebut
ialah masing-masing 12.48, 7.92 dan 5.00 mm pada 7.82% db (asas kering)
kandungan lembapan. Nilai ketumpatan pukal dan ketumpatan sebenar bijiran ini
masing-masing menurun daripada 793.37 kepada 683.62 kg/m3 (P<0.01) dan daripada 1269.37 ke 1206.55 kg/m3 (P<0.05) dengan peningkatan kandungan lembapan. Pekali
geseran dinamik meningkat daripada 0.180 ke 0.316, 0.173 ke 0.276, dan 0.226 ke
0.331 masing-masing di atas permukaan keluli, papan lapis dan kayu dengan peningkatan
kandungan lembapan. Daya pecahan menurun daripada 121.88 ke 68.93 N dengan
peningkatan kandungan lembapan. Kandungan fosforus, kalium, kalsium, natrium
dan magnesium adalah masing-masing 5020, 5576, 3562, 780 and 372 ppm mw% (asas
basah) pada kandungan lembapan asal. Aktiviti antioksidan dan kandungan fenolik
adalah masing-masing 56.62 % and 24.82 μg GAE/mg db pada kandungan lembapan asal.
Kata kunci:
Kacang biasa; sifat fizik; sifat kimia
REFERENCES
Altuntas, E. & Yildiz, M. 2007. Effect of moisture content
on some physical and mechanical properties of faba bean (Vicia faba L.)
grains. Journal of Food Engineering 78(1): 174-183.
Anonymous 2005. Food and Agriculture Organization, URL:
http://www.fao.org/ [16 February 2008].
Barriere, C., Centeno, D., Lebert, A., Leroy-Setrin, S.,
Berdague, J.L. & Talon, R. 2001. Roles of superoxide dismutase and catalase
of Staphylococcus xylosus in the inhibition of linoleic acid oxidation. FEMS
Microbiology Letters 201(2): 181-185.
Bart-Plange, A. & Baryeh, E.A. 2003. The physical properties
of Category B cocoa beans. Journal of Food Engineering 6(3): 219-227.
Baryeh, E.A. 2002. Physical properties of millet. Journal of
Food Engineering 51(1): 39-46
Beebe, S., Gonzalez, A.V. & Rengifo, J. 1999. Research on
trace minerals in common beans. Proceedings of International Workshop Improving
Human Nutrition Through Agriculture: The Role of Int. Agric. Res, Oct 5-7.
Calisir, S., Marakoglu, T., …gut, H. & Ozturk, O. 2005.
Physical properties of rapeseed (Brassica napus oleifera L.). Journal of
Food Engineering 69(1): 61-66.
Carman, K. 1996. Some physical properties of lentil seeds. Journal
of Agricultural Engineering Research 63(2): 87-92.
Cardador-Martinez, A., Loarca-Pina, G. & Oomah, B.D. 2002.
Antioxidant activity in common beans (Phaseolus vulgaris L.). Journal
of Agriculture and Food Chemistry. 50(24): 6975-6980.
Cetin, M. 2007. Physical properties of barbunia bean (Phaselous
vulgaris L. cv. ‘Barbunia’) seed. Journal of Food Engineering 80
(1): 353-358.
Desphande, S.D., Bal, S. & Ojha, T.P. 1993. Physical
properties of soybean. Journal of Agricultural Engineering Research 56
(2): 89-98.
Elkoca, E. & Kantar, F. 2005. Early maturing and high
yielding two new common bean cultivar: Kantar-05 and Elkoca-05. Proceedings of 2nd Turkey Tohumculuk Seed Congress, Adana, Nov 9-11.
Fraser, B.M, Verma, S.S. & Muir, W.E. 1978. Some physical
properties of fababeans. Journal of Agriculture Engineering Research 23(1):
53-57.
Isik, E. & Unal, H. 2007. Moisture-dependent physical
properties of white speckled red kidney bean grains. Journal of Food
Engineering 82(2): 209-216.
Kacar, B. & Kovanci, I. 1982. Chemical phosphorus analysis
in plant, soil and fertilizers and evaluation of results. Ege University, Agricultural Faculty, Izmir, Turkey, Public. number: 352.
Kaleemullah, S. & Gunasekar, J.J. 2002. Moisture-depent
physical properties of arecanut kernels. Biosystems Engineering 82(3):
331-338.
Kara, M., Turgut, N., Erkmen, Y. & Guler, I.E. 1997.
Determination of coefficient of friction of some granules. Proceedings of 17th Agricultural Mechanization National Congress, Tokat, Turkey, Sept 17-19.
Karababa, E. 2006. Physical properties of popcorn kernels. Journal
of Food Engineering 72(1): 100-107.
Karababa, E. & Coskuner, Y. 2007, Moisture depended physical
properties dry sweet corn kernels. International Journal of Food Properties 10(3):
549-560.
Konak, M., Carman, K. & Aydın, C. 2002. Physical
properties of chick pea seeds. Biosystems Engineering 82(1): 73-78.
Mirzaee, E., Rafiee, S., Keyhani, A. & Emam Djomeh, Z. 2009.
Physical properties of apricot to characterize best post harvesting options. Australian
Journal of Crop Science 3(2): 95-100.
Mohsenin, N.N. 1986. Physical Properties of Plant and Animal
Materials. New York: Gordon and Breach Science Publisher.
Ogunjimi, L.A.O., Aviara, N.A. & Aregbesola, O.A. 2002. Some
engineering properties of locust bean seed. Journal of Food Engineering 55(2):
95-99.
Oje, K. & Ugbor, E.C. 1991. Some physical properties of
oilbean seed. Journal of Agricultural Engineering Research 50: 305-313.
Olajide, J.O. & Ade-Obowaye, B.I.O. 1999. Some physical
properties of locust bean seed. Journal of Agricultural Engineering Research 74(2): 213-215.
Ozturk, I., Kara, M., Elkoca, E. & Ercisli, S. 2009.
Physico-mechanical grain properties of new common bean cv. ‘Elkoca-05’. Scientific
Research and Essays 4(2): 088-093.
Paulsen, M.R. 1978. Fracture resistance of soybeans to
compressive loading. T ASAE 21(6): 1210-1216.
Slinkard, K. & Singleton, V.L. 1977. Total phenol analyses:
automation and comparison with manual methods. American Journal of Enology
and Viticulture 28(1): 49-55.
Song, H. & Litchfield, J.B. 1991. Predicting method of
terminal velocity for grains. T ASAE 34(1): 225-230.
Stoilova, T., Pereira, G., Tavares de Sousa, M.M. & Carnide,
V. 2005. Diversity in common bean landraces (Phaseolus vulgaris L.) from
Bulgaria and Portugal. Journal of Central European Agriculture 6(4):
443-448.
Suthar, S.H. & Das, S.K. 1996. Some physical properties of
karingda (Citrullus lanatus (Thumb) Mansf) seeds. Journal of
Agricultural Engineering Research 65(1): 15-22.
Tunde-Akintunde, T.Y., Olajide, J.O. & Akintunde B.O. 2005.
Mass-volume-area related and mechanical properties of soybean as a function of
moisture and variety. International Journal of Food Properties 8(3):
449-456.
Turgut, N., Kara, M., Erkmen, Y. & Guler, I.E. 1998.
Determination of static particle strength of granular fertilizer. Proceedings
of 18th Agricultural Mechanization
National Congress, Tekirdag, Turkey, Sept 17-18.
Vursavus, K. & Ozguven, F. 2004. Mechanical behaviour of
apricot pit under compression loading. Journal of Food Engineering 65(2):
255-261.
*Corresponding author; e-mail: sercisli@hotmail.com
|
|||
|
