Sains Malaysiana 44(6)(2015): 861–867

 

A Mini Scale Batch Reactor for the Production of Palm‑Based Polyol

(Reaktor Kelompok Skala Mini bagi Penghasilan Poliol Poliuretana Sawit)

 

 

KHAIRIAH HAJI BADRI* & MUHAMMAD SYUKRI NGAH

 

Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Darul Ehsan, Malaysia

 

Received: 15 January 2014/Accepted: 15 November 2014

 

ABSTRACT

An investigation on a batch production of palm kernel oil polyol (PKO-p) was conducted via esterification and condensation. The process design was thoroughly studied as a preliminary step for future upscaling. The process variables included necessity of vacuum pump, controlling of heating rate, recording the production time, nitrogen gas flow and agitator speed. About 250 mL PKO-p was successfully synthesized within 3 h. Vacuum pressure was applied to haul out moisture from the system. The control of heating rate and production time are vital to avoid sudden oxidation.

 

Keywords: Batch reactor; palm-based polyurethane; palm kernel oil polyol; process design

 

ABSTRAK

Suatu kajian penghasilan poliol minyak isirong sawit (PKO‑p) secara sesekumpul telah dijalankan melalui tindak balas pengesteran dan penyejatan. Reka bentuk proses telah dikaji dengan teliti sebagai langkah awal dalam kajian penskalaan untuk masa hadapan. Pemboleh ubah proses termasuk keperluan pam vakum, pengawalan kadar pemanasan, masa penghasilan yang direkodkan, aliran gas nitrogen dan halaju pengadun. Sebanyak 250 mL PKO‑p telah berjaya disintesis dalam tempoh 3 jam. Tekanan vakum telah digunakan untuk mengeluarkan kelembapan daripada sistem. Pengawalan kadar pemanasan dan masa penghasilan adalah penting untuk mengelakkan pengoksidaan berlaku secara drastik.

 

Kata kunci: Poliol minyak isirung sawit; poliuretana sawit; reaktor sesekumpul; reka bentuk proses

REFERENCES

Badri, K.H., Othman, Z. & Mohd Razali, I. 2005. Mechanical properties of polyurethane composites from oil palm resources. Iranian Polymer Journal 14(5): 987-993.

Badri, K.H., Shahaldin, F.H. & Othman, Z. 2004. Indigenous coating material from palm oil-based polyamide. Journal of Material Science 39: 4331-4333.

Badri, K.H., Ahmad, S.H. & Zakaria, S. 2001. Production of high-functionality RBD palm kernel oil-based polyester polyol. Journal of Applied Polymer Science 81: 384-389.

Badri, K.H., Ahmad, S.H. & Zakaria, S. 2000. Development of zero ODP rigid polyurethane foam from RBD palm kernel oil. Journal of Material Science Letters 19: 1355-1356.

Benli, S., Yilmazer, Ü., Pekel, F. & Özkar, S. 1998. Effect of fillers on thermal and mechanical properties of polyurethane elastomer. Journal of Applied Polymer Science 68: 1057-1065.

Chian, K.S. & Gan, L.H. 1998. Development of a rigid polyurethane foam from palm oil. Journal of Applied Polymer Science 68: 509-515.

Couper, J.R., Penney, W.R. & Fair, J.R. 2012. Chemical Process Equipment. 3rd ed. USA: Butterworth-Heinemann.

Donati, G. & Paludetto, R. 1997. Scale up of chemical reactor. Catalysis Today 34: 483-533.

Guo, A., Javni, I. & Petrovic, Z. 2000. Rigid polyurethane foams based on soybean oil. Journal of Applied Polymer Science 77: 467-473.

Kurth, T.M., Kurth, R.A., Turner, R.B. & Kreifels, L.P. 2006. Oxylated vegetable-based polyol having increased functionality and urethane materials formed using the polyol, US 7084230.

Shioguci, K., Kuzui, H. & Yuuki, A. 1999. Process of measuring cloud point of polyglycerol-fatty acid ester, process of evaluating properties, and process of producing, US 5883274.

Silverstein, R.M. & Francis, X.W. 1998. Spectrometric Identification of Organic Compounds. 6th ed. New York: John Wiley & Sons.

Tanaka, R., Hirose, S. & Hatakeyama, H. 2007. Preparation and characterization of polyurethane foams using a palm oil-based polyol. Bioresource Technology 99: 3810-3816.

Wirpsza, Z. 1993. Properties of polyurethane. In Polyurethanes: Chemistry, Technology and Applications, (Ellis Horwood Series in Polymer Science and Technology). London: Ellis Horwood Ltd. pp. 118-121.

 

 

*Corresponding author; email: kaybadri@ukm.edu.my