Sains Malaysiana 49(1)(2020): 29-41

http://dx.doi.org/10.17576/jsm-2020-4901-04

 

Optimization of Response Surface Methodology by D-Optimal Design for Alkaline Hydrolysis of Crude Palm Kernel Oil

(Pengoptimuman Kaedah Gerak Balas Permukaan melalui Reka Bentuk D-Optimum untuk Hidrolisis Alkali Minyak Isirong Sawit Mentah)

 

MURAD BAHADI1,2, MOHAMAD FIRDAUS YUSOFF1, JUMAT SALIMON 1& DARFIZZI DERAWI1*

 

1Laboratory for Biolubricant, Biofuels and Bioenergy Research, Department of Chemical Sciences, Faculty of Sciences and Technology, Universiti Kebangsaan Malaysia, 43600 UKM Bangi, Selangor Darul Ehsan, Malaysia

 

2Faculty of Education, Hadhramout University, Hadhramout, Yemen

 

Received: 20 March 2019/Accepted: 8 October 2019

 

ABSTRACT

Crude palm kernel oil (CPKO) was converted into its free fatty acids (FFAs) via alkaline hydrolysis. The reaction optimization was performed using Response Surface Methodology (RSM) through D-optimal design to optimize the conducted hydrolysis parameters. The optimization parameters were varied from 1.5 to 2.5 h of reaction time, 50-70°C of reaction temperature, and ethanolic KOH concentration 1-2 M. The highest percentage of free fatty acids was 98 ± 0.7 % with a percentage fatty acid yield of 84.7 ± 0.6 % under optimal conditions, which were 2.16 h of reaction time, 1.77 M ethanolic KOH concentration, and 70°C reaction temperature. High-temperature Capillary Column Gas Chromatography (GC-FID) and Nuclear Magnetic Resonance-Fourier Transform Infrared Spectroscopy (NMR-FTIR) were employed to characterize the product. The physicochemical properties of fatty acids were also tested. The acid value, iodine value, and hydroxyl value of the fatty acids obtained were 275.4 ± 0.7 mg NaOH/g, 21.8 ± 0.2 g I2 / 100 g, and 168.2 ± 0.1 mg KOH/g, respectively.

 

Keywords: Crude palm kernel oil; fatty acids; hydrolysis; response surface methodology

 

ABSTRAK

Minyak isirong sawit mentah (CPKO) telah ditukar kepada asid lemak bebas (FFAs) melalui hidrolisis alkali. Pengoptimuman tindak balas dijalankan dengan menggunakan kaedah gerak balas permukaan (RSM) melalui reka bentuk D-optimum untuk mengoptimumkan parameter hidrolisis yang dijalankan. Parameter pengoptimuman telah berubah daripada 1.5 hingga 2.5 jam masa tindak balas, 50-70°C suhu tindak balas dan kepekatan etanolik KOH 1-2 M. Peratusan tertinggi asid lemak bebas adalah 98 ± 0.7% dengan peratus hasil asid lemak sebanyak 84.7 ± 0.6% di bawah keadaan optimum, iaitu 2.16 jam masa tindak balas, 1.77 M kepekatan etanolik KOH dan 70°C suhu tindak balas. Kromatografi Gas Kolum Kapilari Suhu tinggi (GC-FID) dan Resonans Magnet Nuklear- Spektroskopi Transformasi Fourier Inframerah (NMR-FTIR) telah digunakan untuk mencirikan produk. Sifat fizikokimia asid lemak juga telah diuji. Nilai asid, iodin dan hidroksil asid lemak yang diperoleh adalah 275.4 ± 0.7 mg NaOH/g, 21.8 ± 0.2 g I2 / 100 g dan 168.2 ± 0.1 mg KOH/g.

 

Kata kunci: Asid lemak; hidrolisis; kaedah gerak balas permukaan; minyak isirong sawit mentah

 

REFERENCES

Asiri, A.M. & Bahajaj, A.A. 2005. Principles of Spectroscopic Analysis of Organic Compounds. 1st ed. Dar Hafiz. Jeddah, KSA.

Bahadi, M.A., Japir, A.W., Salih, N. & Salimon, J. 2016a. Free fatty acids separation from Malaysian high free fatty acid crude palm oil using molecular distillation. Malaysian Journal of Analytical Sciences 20: 1042-1051.

Bahadi, M.A., Salimon, J. & Japir, A.W.M. 2016b. The physicochemical and thermal properties of Malaysian high free fatty acid crude palm oil. AIP Conference Proceedings 1784: 030002.

Derawi, D. 2016. Experimental design using response surface methods for palm olein-based hydroxy-ether systhesis. Sains Malaysiana45(7): 1149-1154.

Derawi, D. & Salimon, J. 2013a. Palm olein polyols production by batch and continuous hydrolisis. Sains Malaysiana42(8): 1121-1129.

Derawi, D. & Salimon, J. 2013b. Palm olein based biolubricant basestocks: Synthesis, characterisation, tribological and rheological analysis. Malaysian Journal of Analytical Sciences17(1): 153-163.

Fu, X., Zhu, X., Gao, K. & Duan, J. 1995. Oil and fat hydrolysis with lipase from Aspergillus sp. Journal of the American Oil Chemists' Society 72(5): 527-531.

Hashim, H.B. & Salimon, J. 2008. Kajian pengoptimuman tindak balas hidrolisis minyak kacang soya. The Malaysian Journal of Analytical Sciences 12: 205-209.

Hermansyah, H., Kubo, M., Shibasaki-Kitakawa, N. & Yonemoto, T. 2006. Mathematical model for stepwise hydrolysis of triolein using Candida rugosa lipase in biphasic oil-water system. Biochemical Engineering Journal 31(2): 125-132.

Holliday, R.L., King, J.W. & List, G.R. 1997. Hydrolysis of vegetable oils in sub-and supercritical water. Industrial & Engineering Chemistry Research 36(3): 932-935.

Ibrahim, N.A. 2013. Characteristics of Malaysian palm kernel and its products. Journal of Oil Palm Research 25(2): 245-252.

Ichihara, K.I. & Fukubayashi, Y. 2010. Preparation of fatty acid methyl esters for gas-liquid chromatography. Journal Of Lipid Research 51(3): 635-640.

Japir, A.A.W., Salimon, J., Derawi, D., Yahaya, B.H., Bahadi, M., Al-Shujaʼa, S. & Yusop, M.R. 2018. A highly efficient separation and physicochemical characteristics of saturated fatty acids from crude palm oil fatty acids mixture using methanol crystallisation method. OCL 25(2): A203.

Japir, A.A.W., Salimon, J., Derawi, D., Bahadi, M., Al-Shuja'a, S. & Yusop, M.R. 2017. Physicochemical characteristics of high free fatty acid crude palm oil. OCL 24(5): 506.

Japir, A.A.W., Salimon, J., Derawi, D., Yahaya, B.H., Bahadi. & Yusop, M.R. 2016. Purification of high free fatty acid crude palm oil using molecullar distillation. Asian Journal of Chemistry 28(11): 2549-2554.

Khor, H.T., Tan, N.H. & Chua, C.L. 1986. Lipase-catalyzed hydrolysis of palm oil. Journal of the American Oil Chemists Society 63(4): 538-540.

King, J., Holliday, R. & List, G. 1999. Hydrolysis of soybean oil in a subcritical water flow reactor. Green Chemistry 1(6): 261-264.

Salimon, J. & Abdullah, R. 2008. Physicochemical properties of Malaysian Jatropha curcas seed oil. Sains Malaysiana 37(4): 379-382.

Salimon, J., Abdullah, B.M. & Salih, N. 2012. D-optimal design optimization of Jatropha curcas L. seed oil hydrolysis via alkali-catalyzed reactions. Sains Malaysiana 41(6): 731-738.

Salimon, J., Abdullah, B.M. & Salih, N. 2011. Hydrolysis optimization and characterization study of preparing fatty acids from Jatropha curcas seed oil. Chemistry Central Journal 5(1): 67.

Salimon, J., Said, M., Ramli, S. & Lazim, M. 2006. Oil and Fat Analysis. Bangi: UKM Press.

Serri, N.A., Kamarudin, A.H. & Abdul Rahaman, S.N. 2008. Preliminary studies for production of fatty acids from hydrolysis of cooking palm oil using C. rugosa lipase. Journal of Physical Science 19(1): 79-88.

Sherazi, S.T.H., Kandhro, A., Mahesar, S.A., Bhanger, M.I., Talpur, M.Y. & Arain, S. 2009. Application of transmission FT-IR spectroscopy for the trans fat determination in the industrially processed edible oils. Food Chemistry 114(1): 323-327.

Velayutham, T.S., Abd Majid, W.H., Ahmad, A.B., Kang, G.Y. & Gan, S.N. 2009. Synthesis and characterization of polyurethane coatings derived from polyols synthesized with glycerol, phthalic anhydride and oleic acid. Progress in Organic Coatings 66: 367-371.

 

*Corresponding author; email: darfizzi@ukm.edu.my

 

 

 

previous