Sains Malaysiana 48(1)(2019): 199–208

http://dx.doi.org/10.17576/jsm-2019-4801-23

Applicability of Iron (III) Trimesic (Fe-BTC) to Enhance Lignin Separation from Pulp and Paper Wastewater

(Kebolehgunaan Besi (III) Trimesik (Fe-BTC) untuk Peningkatan Pemisahan Lignin daripada Air Sisa Pulpa dan Kertas)

BHUCKCHANYA PANGKUMHANG^1,2, PANITAN JUTAPORN^1,2, KWANNAPAT SORACHOTI³,

PUMMARIN KHAMDAHSAG^4,5 & VISANU TANBOONCHUY^1,2,5*

¹Department of Environmental Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen 40002, Thailand

²Research Center for Environmental and Hazardous Substance Management (EHSM), Khon Kaen University, Khon Kaen 40002, Thailand

³International Programs in Hazardous Substance and Environmental Management, Graduate School, Chulalongkorn University, Bangkok 10330, Thailand

⁴Environmental Research Institute, Chulalongkorn University, Bangkok 10330, Thailand

⁵Research Program on Development of Appropriate Technologies for Coloring Agent Removal from Textile Dyeing, Pulp & Paper, Sugar Industries for Sustainable Management Center of Excellence on Hazardous Substance Management (HSM), Chulalongkorn University, Bangkok 10330, Thailand

Diserahkan: 26 April 2018/Diterima: 29 Ogos 2018

ABSTRACT

This study assesses the application of iron (III) trimesic (Fe-BTC) as a coagulant-flocculant to remove lignin from pulp and paper (P&P) wastewater. In this research, Fe-BTC was characterized by X-ray diffraction (XRD), while the functional groups of Fe-BTC and lignin were analyzed by Fourier transform infrared (FT-IR) spectroscopy. Scanning electron microscopy (SEM) determined the surface morphology of the material. The influential parameters affecting lignin removal included the initial lignin concentration, the quantity of Fe-BTC, and the pH which were investigated using a single batch mixing system. The experimental and optimum operational conditions were determined using Box-Behnken design (BBD). Fe-BTC dosage plays a major role in efficiently removing lignin, while the pH and initial lignin concentration had no significant effect. Greater than 80% removal efficiency could be achieved with a Fe-BTC dosage as low as 2 g/L. The proposed mechanism of lignin aggregation was that Fe molecules were released from unsaturated sites of Fe-BTC and then formed new bonds with O in the methoxy lignin group. The interaction between Fe-BTC and lignin was π-π stacking (benzene ring), which explains the formation of F-O bonds in the lignin sludge.

Keywords: Box-Behnken design; Fe-BTC; lignin; metal-organic frameworks; MOFs; pulp and paper

ABSTRAK

Kajian ini menilai penggunaan besi (III) trimesik (Fe-BTC) sebagai bahan penggumpal untuk menyingkirkan lignin daripada air sisa pulpa dan kertas (P&P). Dalam kajian ini, Fe-BTC dicirikan oleh pembelauan sinar-x (XRD) manakala kumpulan fungsian Fe-BTC dan lignin dianalisis melalui spektroskopi transformasi Fourier inframerah (FT-IR). Mikroskop Elektron Imbasan (SEM) menentukan morfologi permukaan untuk bahan. Parameter penting yang menyebabkan penyingkiran lignin adalah termasuk kepekatan pemula lignin, kuantiti Fe-BTC dan pH yang dikaji menggunakan sistem campuran kelompok tunggal. Syarat uji kaji dan pengoperasian optimum telah ditentukan dengan menggunakan reka bentuk Box-Behnken (BBD). Dos Fe-BTC memainkan peranan penting dalam menyingkirkan lignin dengan cekap, manakala pH dan kepekatan pemula lignin tidak menunjukkan kesan yang ketara. Lebih daripada 80% kecekapan penyingkiran boleh dicapai dengan dos Fe-BTC serendah 2 g/L. Mekanisme cadangan daripada pengagregatan lignin adalah bahawa Fe molekul dibebaskan dari unsatured tapak Fe-BTC dan kemudian membentuk ikatan baharu dengan O dalam kumpulan lignin metoksi. Interaksi antara Fe-BTC dan lignin ialah susunan π-π (gelang benzena) yang menjelaskan pembentukan ikatan F-O dalam enap-cemar lignin.

Kata kunci: Fe-BTC; lignin; MOFs; pulpa dan kertas; rangka kerja logam-organik; reka bentuk Box-Behnken

RUJUKAN

Ali, M. & Sreekrishnan, T.R. 2001. Aquatic toxicity from pulp and paper mill effluents: A review. Advances in Environmental Research 5(2): 175-196.

Andersson, K.I., Eriksson, M. & Norgren, M. 2012. Lignin removal by adsorption to fly ash in wastewater generated by mechanical pulping. Industrial and Engineering Chemistry Research 51(8): 3444-3451.

Archariyapanyakul, P., Pangkumhang, B., Khamdahsag, P. & Tanboonchuy, V. 2017. Synthesis of silica-supported nanoiron for Cr(VI) removal: Application of Box-Behnken Statistical Design (BBD). Sains Malaysiana 46(4): 655-665.

Ashrafi, O., Yerushalmi, L. & Haghighat, F. 2015. Wastewater treatment in the pulp-and-paper industry: A review of treatment processes and the associated greenhouse gas emission. Journal of Environmental Management 158: 146-157.

Autie-Castro, G., Autie, M.A., Rodríguez-Castellón, E., Aguirre, C. & Reguera, E. 2015. Cu-BTC and Fe-BTC metal-organic frameworks: Role of the materials structural features on their performance for volatile hydrocarbons separation. Colloids and Surfaces A: Physicochemical and Engineering Aspects 481: 351-357.

Cassey, T.L., Yaser, A., Shazwan, A.S. & Hairul, M.A. 2014. Current review on the coagulation/flocculation of lignin containing wastewater. International Journal of Waste Resources 4(03): 2-7.

Ciputra, S., Antony, A., Phillips, R., Richardson, D. & Leslie, G. 2010. Comparison of treatment options for removal of recalcitrant dissolved organic matter from paper mill effluent. Chemosphere 81(1): 86-91.

Deng, Y., Feng, X., Zhou, M., Qian, Y., Yu, H. & Qiu, X. 2011. Investigation of aggregation and assembly of alkali lignin using iodine as a probe. Biomacromolecules 12(4): 1116- 1125.

Elwakeel, K.Z. & Guibal, E. 2015. Selective removal of Hg(II) from aqueous solution by functionalized magnetic-macromolecular hybrid material. Chemical Engineering Journal 281: 345-359.

Fang, Y., Wen, J., Zeng, G., Jia, F., Zhang, S., Peng, Z. & Zhang, H. 2017. Effect of mineralizing agents on the adsorption performance of metal-organic framework MIL-100(Fe) towards chromium(VI). Chemical Engineering Journal 337: 532-540.

García, E., Medina, R., Lozano, M., Hernández Pérez, I., Valero, M. & Franco, A. 2014. Adsorption of azo-dye orange II from aqueous solutions using a metal-organic framework material: Iron-benzenetricarboxylate. Materials 7(12): 8037-8057.

Hameed, Y.T., Idris, A., Hussain, S.A., Abdullah, N., Man, H.C. & Suja, F. 2018. A tannin-based agent for coagulation and flocculation of municipal wastewater as a pretreatment for biofilm process. Journal of Cleaner Production 182: 198-205.

Hao, C., Li, J., He, Q., Zhou, Z., Guo, X., Wang, X., Gao, S. & Zhang, Y. 2016. Ultrasonic synthesis and properties of sodium lignosulfonate-grafted poly(acrylic acid-co-vinyl alcohol) composite superabsorbent polymer. Australian Journal of Chemistry 69: 1155-1161.

Hasan, Z. & Jhung, S.H. 2015. Removal of hazardous organics from water using metal-organic frameworks (MOFs): Plausible mechanisms for selective adsorptions. Journal of Hazardous Materials 283: 329-339.

Kaur, D., Bhardwaj, N.K. & Lohchab, R.K. 2018. A study on pulping of rice straw and impact of incorporation of chlorine dioxide during bleaching on pulp properties and effluents characteristics. Journal of Cleaner Production 170(X): 174-182.

Khan, N.A., Hasan, Z. & Jhung, S.H. 2013. Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs): A review. Journal of Hazardous Materials 244- 245: 444-456.

Kiattisaksiri, P., Khamdahsag, P., Khemthong, P., Pimpha, N. & Grisdanurak, N. 2015. Photocatalytic degradation of 2,4-dichlorophenol over Fe-ZnO catalyst under visible light. Korean Journal of Chemical Engineering 32: 1578-1585.

Klapiszewski, Ł., Siwińska-Stefańska, K. & Kołodyńska, D. 2017a. Development of lignin based multifunctional hybrid materials for Cu(II) and Cd(II) removal from the aqueous system. Chemical Engineering Journal 330: 518-530.

Klapiszewski, Ł., Zdarta, J., Antecka, K., Synoradzki, K., Siwińska-Stefańska, K., Moszyński, D. & Jesionowski, T. 2017b. Magnetite nanoparticles conjugated with lignin: A physicochemical and magnetic study. Applied Surface Science 422: 94-103.

Lee, C.S., Robinson, J. & Chong, M.F. 2014. A review on application of flocculants in wastewater treatment. Process Safety and Environmental Protection 92(6): 489-508.

Lee, K.E., Morad, N., Teng, T.T. & Poh, B.T. 2012. Development, characterization and the application of hybrid materials in coagulation/flocculation of wastewater: A review. Chemical Engineering Journal 203: 370-386.

Mahmoodi, N.M., Abdi, J., Oveisi, M., Alinia Asli, M. & Vossoughi, M. 2018. Metal-organic framework (MIL-100 (Fe)): Synthesis, detailed photocatalytic dye degradation ability in colored textile wastewater and recycling. Materials Research Bulletin 100: 357-366.

Majano, G., Ingold, O., Yulikov, M., Jeschke, G. & Pérez- Ramírez, J. 2013. Room-temperature synthesis of Fe– BTC from layered iron hydroxides: The influence of precursor organisation. CrystEngComm. http://xlink.rsc. org/?DOI=c3ce41366g.

Moetaz ElSergany, Amimul Ahsan & Md. Maniruzzaman A. Aziz. 2015. Optimizing the performance of a paper mill effluent treatment. Sains Malaysiana 44(1): 101-106.

Naseem, A., Tabasum, S., Zia, K.M., Zuber, M., Ali, M. & Noreen, A. 2016. Lignin-derivatives based polymers, blends and composites: A review. International Journal of Biological Macromolecules 93: 296-313.

Norgren, M. & Edlund, H. 2014. Lignin: Recent advances and emerging applications. Current Opinion in Colloid and Interface Science 19(5): 409-416.

Nyman, V., Rose, G. & Ralston, J. 1986. The colloidal behaviour of kraft lignin and lignosulfonates. Colloids and Surfaces 21: 125-147.

Roopan, S.M. 2017. An overview of natural renewable bio-polymer lignin towards nano and biotechnological applications. International Journal of Biological Macromolecules 103: 508-514.

Sciortino, L., Alessi, A., Messina, F., Buscarino, G. & Gelardi, F.M. 2015. Structure of the FeBTC metal-organic framework: A model based on the local environment study. Journal of Physical Chemistry C 119(14): 7826-7830.

Sorachoti, K., Pangkumhang, B., Tanboonchuy, V., Tulaphol, S. & Grisdanurak, N. 2017. Reversible adsorption of metalworking fluids (MWFs) on Cu-BTC metal organic framework. Chinese Journal of Chemical Engineering 25(6): 768-774.

Sriprom, P., Neramittagapong, S., Lin, C., Wantala, K., Neramittagapong, A. & Grisdanurak, N. 2015. Optimizing chemical oxygen demand removal from synthesized wastewater containing lignin by catalytic wet-air oxidation over CuO/Al2O3catalysts. Journal of the Air and Waste Management Association 65(7): 828-836.

Teh, C.Y., Budiman, P.M., Shak, K.P.Y. & Wu, T.Y. 2016. Recent advancement of coagulation-flocculation and its application in wastewater treatment. Industrial and Engineering Chemistry Research 55(16): 4363-4389.

Tolod, K.R., Bajamundi, C.J.E., De Leon, R.L., Sreearunothai, P., Khunphonoi, R. & Grisdanurak, N. 2016. Visible light-driven photocatalytic hydrogen production using Cu-doped SrTiO3. Energy Sources, Part A: Recovery, Utilization and Environmental Effects 38(2): 286-294.

Wang, X., Wang, Y., Hou, H., Wang, J. & Hao, C. 2017. Ultrasonic method to synthesize glucan-g-poly(acrylic acid)/sodium lignosulfonate hydrogels and studies of their adsorption of Cu2+from aqueous solution. ACS Sustainable Chemistry and Engineering 5(8): 6438-6446.

Wang, X., Wu, F., Duan, Y., Wang, Y., Hao, C. & Ge, C. 2016. Lignin-assisted solid-phase synthesis of nano-CuO for a photocatalyst with excellent catalytic activity and high performance supercapacitor electrodes. RSC Advances 6(70): 65644-65653.

Wang, X., Zhang, Y., Hao, C., Dai, X., Zhu, F. & Ge, C. 2014. Ultrasonic synthesis and properties of a sodium lignosulfonate-grafted poly(acrylic acid-co-acryl amide) composite super absorbent polymer. New Journal of Chemistry 38(12): 6057-6063.

Wang, Y., Wang, X., Ding, Y., Zhou, Z., Hao, C. & Zhou, S. 2018. Novel sodium lignosulphonate assisted synthesis of well dispersed Fe3O4microspheres for efficient adsorption of copper (II). Powder Technology 325: 597-605.

Wang, Y., Zhu, L., Wang, X., Zheng, W., Hao, C., Jiang, C. & Wu, J. 2018. Synthesis of aminated calcium lignosulfonate and its adsorption properties for azo dyes. Journal of Industrial and Engineering Chemistry 61: 321-330.

Wei, N., Zhang, Z., Liu, D., Wu, Y., Wang, J. & Wang, Q. 2015. Coagulation behavior of polyaluminum chloride: Effects of pH and coagulant dosage. Chinese Journal of Chemical Engineering 23(6): 1041-1046.

Zhan, X., Gao, B., Yue, Q., Liu, B., Xu, X. & Li, Q. 2010. Removal natural organic matter by coagulation-adsorption and evaluating the serial effect through a chlorine decay model. Journal of Hazardous Materials 183(1-3): 279-286.

Zhu, B., Yu, X., Jia, Y., Peng, F., Sun, B., Zhang, M. & Huang, X. 2012. Iron and 1,3,5-benzenetricarboxylic metal-organic coordination polymers prepared by solvothermal method and their application in efficient As(V) removal from aqueous solutions. The Journal of Physical Chemistry C 116(V): 8601-8607.

*Pengarang untuk surat-menyurat; email: visanu@kku.ac.th