Sains Malaysiana 45(11)(2016): 1733–1739

 

Tensile, Thermal and Water Absorption Properties of Corn Stalk Filled Low Density Polyethylene Composites: Effect of Coconut Oil Coupling Agent

(Sifat Tegangan, Terma dan Penyerapan Air Komposit Batang Jagung Terisi Polietilena

Ketumpatan Rendah: Kesan Agen Pangganding Minyak Kelapa)

 

SALMAH HUSSEINSYAH¹*, KOAY SEONG CHUN², CHAN MING YENG²

& AZIMAH ISMAIL¹

 

¹School of Material Engineering, Universiti Malaysia Perlis, 02600 Jejawi, Perlis Indera Kayangan

Malaysia

 

²School of Engineering, Taylor’s University Lakeside Campus, No. 1, Jalan Taylor’s

47500 Subang Jaya, Selangor Darul Ehsan, Malaysia

 

Diserahkan: 22 Februari 2014/Diterima: 5 April 2016

 

ABSTRACT

In this study, the corn stalk (CS) had been utilized as natural filler in low density polyethylene (LDPE). The effect of CS loading and coconut oil coupling agent (COCA) on tensile, thermal and water absorption properties of LDPE/CS composites were investigated. The increases of CS decreased the tensile strength and elongation at break of LDPE/CS composites, but increased in Young’s modulus. The incorporation of CS also contributed to high water uptake of LDPE/CS composites. However, the presence of CS has increased the crystallinity of composites and LDPE matrix due to nucleating effect. The addition of COCA has significantly increased the tensile strength, elongation at break, water resistivity and crystallinity of LDPE/CS composites, but slightly reduced in Young’s modulus. The scanning electron microscope (SEM) also evidence the presence of COCA improved the adhesion between CS and LDPE matrix.

 

Keywords: Coconut oil coupling agent; composites; corn stalk; low density polyethylene

 

ABSTRAK

Dalam kajian ini, batang jagung (CS) telah digunakan sebagai pengisi semula jadi dalam polietilena berketumpatan rendah (LDPE). Kesan pembebanan pengisi CS dan agen pengganding minyak kelapa (COCA) ke atas sifat kekuatan tensil, haba dan penyerapan air komposit LDPE/CS telah dikaji. Peningkatan pembebanan pengisi CS telah mengurangkan kekuatan tegangan dan pemanjangan pada takat putus komposit LDPE/CS, tetapi modulus Young meningkat. Penambahan CS juga menyumbang kepada penyerapan air yang tinggi bagi komposit LDPE/CS. Walau bagaimanapun, kehadiran CS telah menyebabkan penghabluran matriks LDPE yang tinggi, ia disebabkan oleh kesan penukleusan. Penambahan COCA telah meningkatkan kekuatan tegangan, pemanjangan pada takat putus, rintangan terhadap air dan penghabluran komposit LDPE/CS, tetapi modulus Young didapati berkurang. Mikroskop imbasan elektron (SEM) juga menunjukkan bukti kehadiran COCA meningkatkan lekatan antara CS dan matriks LDPE.

 

Kata kunci: Agen pengganding minyak kelapa; batang jagung; komposit; poletilena ketumpatan rendah

RUJUKAN

Aisaeed, T., Yousif, B.F. & Ku, H. 2013. The potential of using date palm fibre as reinforcement for polymeric composites. Materials and Design 43: 177-184.

Amri, F., Hussiensyah, S. & Hussin, K. 2013. Effect of sodium dodecyl sulfate on mechanical and thermal properties of polypropylene/chitosan composites. Journal of Thermoplastic Composite Materials 26: 878-892.

Balakrishna, N.S., Ismail, H. & Othman, N. 2012. The effects of rattan filler loadings on properties of rattan powder-filled polypropylene composites. BioResources 7: 5677-5690.

Chun, K.S. & Husseinsyah, S. 2014a. Polylactic acid/corn cob eco-composites: Effect of new coupling agent. Journal of Thermoplastic Composite Materials 27: 1667-1678.

Chun, K.S. & Husseinsyah, S. 2014b. Agro-waste based composites from cocoa pod husk and polypropylene: Effect of filler content and chemical treatment. Journal of Thermoplastic Composites Materials 0892705714563125.

Chun, K.S., Husseinsyah, S. & Yeng, CM. 2015. Green composites from kapok husk and recycled polypropylene: Processing torque, tensile, thermal, and morphological properties. Journal of Thermoplastic Composites Materials. 0892705715569822.

Chun, K.S., Husseinsyah, S. & Azizi, F.N. 2013a. Characterization and properties of recycled polypropylene/coconut shell powder composites: Effect of sodium dodecyl sulfate modification. Polymer-Plastics Technology and Engineering 52: 287-294.

Chun, K.S., Husseinsyah, S. & Osman, H. 2013b. Properties of coconut shell powder-filled polylactic acid ecocomposites: Effect of meleic acid. Polymer Engineering and Science 53: 1109-1116.

Chun, K.S., Husseinsyah, S. & Osman, H. 2013c. Modified cocoa pod husk-filled polypropylene composites by using methacrylic acid. BioResources 8: 3260-3275.

Chun, K.S., Husseinsyah, S. & Osman, H. 2013d. Utilization of cocoa pod husk as filler in polypropylene biocomposites: Effect of maleated polypropylene. Journal of Thermoplastic Composites Materials 28: 1507-1521.

Flandez, J., Gonzalez, I., Replandis, J.B., Monsouri, N.E.E., Vilaseca, F. & Mutje, P. 2012. Management of corn stalk waste as reinforcement for polypropylene injection moulded composites. BioResources 7: 1836-1849.

George, J., Bhagawan, S.S. & Thomas, S. 1998. Effect of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fiber. Composites Science and Technology 58: 1471-1485.

Husseinsyah, S., Chun, K.S., Hadi, A. & Ahmad, R. 2014. Effect of filler loading and coconut oil coupling agent on properties of low density polyethylene and palm kernel shell eco-composites. Journal of Vinyl & Additive Technology 22(3): 200-205.

Jae, G.G., Sun, Y.L., Sang, J.C., Geum, H.D. & Jung, H.K. 2010. Effect of chemical treatment of hybrid fillers on the physical and thermal properties of wood plastic composites. Composites: Part A 41: 1491-1497.

Ndiaye, D. & Tidjani, A. 2012. Effect of coupling agents on thermal behavior and mechanical properties of wood flour/ polypropylene composites. Journal of Composite Materials 46: 3607-3075.

Panthapulakkal, S. & Sain, M. 2006. Injection molded wheat straw and corn stem filled polypropylene composites. Journal of Polymer and the Environment 14: 265-272.

Shash, V. 1983. Handbook of Polymer Testing. New York: A Wiley Interscience Publication.

Suryadiansyah, Ismail, H. & Azhari, B. 2007. Waste paper filled polypropylene composites: the comparison effect on ethylene diamine dilaurate as a new compatibilizer with maleic polypropylene. Journal of Reinforced Plastics and Composites 26: 51-67.

Wan, T., Huang, R., Zhao, Q., Xiong, L., Luo, L., Tan, X. & Cai, G. 2013. Synthesis and swelling properties of corn stalk-composites superabsorbent. Journal of Applied Polymer Science 130: 698-703.

Xie, Y., Hill, C.A.S., Xiao, Z., Militz, H. & Mai, C. 2010. Silane coupling agents used for natural fiber/polymer composites: A review. Composites: Part A 41: 806-819.

Yeng, C.M., Husseinsyah, S. & Ting, S.S. 2013. Modified corn cob filled chitosan biocomposites films. Polymer-Plastics Technology and Engineering 52: 1496-1502.

Zaaba, N.F., Ismail, H. & Jaafar, M. 2013. Effect of peanut shell powder content on the properties of recycled polypropylene (RPP)/peanut shell powder (PSP) composites. BioRecources 8: 5826-5841.

Zhao, Y., Qiu, J., Feng, H. & Zhang, M. 2012. The interfacial modification of rice straw fiber reinforced poly(butylene succinate) composites: Effect of aminosilane with different alkoxy groups. Journal of Applied Polymer Science 125: 3211-3220.

 

 

*Pengarang untuk surat-menyurat; email: irsalmah@unimap.edu.my